• Changing the world, one floor at a time
  • +40 743 147 517
  • aia@dr-schutz.com
  • The Best Industrial

    Solution Provider

Health Care and Pharmaceutical

If your conductive floor is in an operating theater or a production area for pharmaceuticals, and if you have problems with the measurements and the company who made the audit does not approve your conductive floors, then Dr Schutz has the solution.

Your conductive floor can be recoated with Dr Schutz ESD Transparent PU System in a more cost efficient way than to change your floor. The old floor will shine again and after conductivity measurements the floor will fulfill the DIN EN 61340-5-1 ESD requirements as well as the TRBS 2153, the requirements for explosion prevention, which we know are so important for you.

The ESD Transparent PU System is a water based 2 component clear coat, not thicker then 50 microns, but it has been proven to be the most wear and tear resistant coating in the market. Being a hermetically sealed poured finish, it will also make the cleaning and maintaining of your floor a lot easier and more cost effective.

If on the other hand your floor needs a new color or if you would like to refurbish the old color, then Dr. Schutz ESD Color PU System will do exactly just that. This product will also upgrade and then preserve conductivity of your floor to the requested specifications, while giving your floor a brand new look and making it easy to maintain.

All this can be done in a very cost effective way and at great speed. We insure dust free installation, so you don’t have to stop production for weeks and the refurbished surface with ESD Color PU System can be used after 48 hours at full capacity.

Both Dr Schutz coatings are capable of handling all kinds of traffic and can be cleaned easily with the ESD Floor Cleaner on a daily basis.

For all further questions please don’t hesitate to contact us, we will find a solution for you!